Product Categories
Optimists
Optiparts
EziOpti Charters
Tackers
Boatshed Kiosk & Boat Hire
Club Marine
420 & 470
Lasers
SEA Gear

Current Category
Lasers > Foils

	7007 - Centreboard The centreboard is an integral part of any sailing boat providing the righting force needed for the boat to move forward instead of sideways. These currently come with a fibreglass finish, meaning that the boards are stronger and have a smoother finish.		Price:	QTY:

	7385 - Centreboard Stopper Assembly The centreboard stopper is fitted into the head of the centreboard and prevents it from slipping through the centreboard case.		Price:	QTY:

	7008 - Rudder Blade This is the plain rudder blade that is an integral part of the boat. It facilitates steering combined with the tiller, tiller extension and rudder head. These rudder blades are now finished with fibreglass which makes them stronger, less susceptible to scratches and gives them a smoother finish.		Price:	QTY:

	7384 - Rudder Bushing Set Includes the bolt, nut and bushing to hold the rudder blade inside the rudder head.		Price:	QTY:

	7451 - Rudder Head Assembly The rudder head holds the rudder blade in place and can be used to rotate the rudder blade. It also connects the rudder blade to the tiller, and holds the whole rudder in place, as it is hooked into the rudder gudgeons.		Price:	QTY:

	7450 - Rudder Retaining Clip This pin slides through part of the rudder head when the rudder is in the gudgeons preventing it from sliding out of the gudgeons.		Price:	QTY:

	11017 - Rudder Complete Rudder comes complete with rudder blade in rudder head connected with the rudder bushing set.		Price:	QTY:

	7341 - Tiller Cleat This cleat is fitted onto the tiller to tie off the rudder angle control line		Price:	QTY:

	5064 - Tiller Extension The tiller extension is used to steer when one is too far away from the tiller to use it.		Price:	QTY:

	7469 - Tiller Retaining Pin The tiller retaining pin is an integral part of the rudder system as it holds the tiller in the rudder head and prevents it from slipping out.		Price:	QTY:

	7436 - Tiller Wedge The tiller wedge fits onto the end of the tiller and provides the tiller with a tight fit inside the rudder head.		Price:	QTY:

	1248 - Tiller Bare This tiller unlike the usual tiller, which comes with wedge or flat bar, and fitting for the tiller extension, is a bare bar.		Price:	QTY:

	11041 - Tiller - New Style with Wedge This tiller comes with a wedge at the back to fit into the rudder head, a cleat in the middle to tie off the rudder, and a the universal tiller extension socket at the end to connect it to the tiller extension.		Price:	QTY:

	11042 - Tiller with Extension (Wedge) The new style tiller with wedge and fittings comes with the standard aluminum tiller extension.		Price:	QTY:

	11040 - Tiller - Old Style with Flat Bar In case you are still a fan of the old style tiller. This tiller is shaved down on an angle at the back and a flat bar is added so that it sits properly in the rudder head. Comes with usual cleat and universal joint fittings.		Price:	QTY:

	11043 - Tiller with Extension (Flat Bar) The Old style tiller with a flat bar now can be ordered with an extension tiller as well. The extension tiller is the standard aluminium extension and comes with all the fittings necessary for a tiller + tiller extension system		Price:	QTY:

	5067 - Carbon Tiller Extension - 22mm 22mm carbon Tiller Extension suitable for the smaller grip		Price:	QTY:

	5069 - Carbon Tiller Extension - 26mm 26mm carbon Tiller Extension suitable for the larger grip		Price:	QTY:

	5071 - Carbon Tiller - 12K Finish		Price:	QTY: